**EGG INCUBATOR - Key Specifications:**

1. **Power:**
   - Starting: 250 W
   - Steady Heating: 40/70 W

2. **Voltage:**
   - 220VAC / 50‐60 Hz (Custom order: 110VAC / 50‐60Hz)

3. **Body:**
   - CNC-manufactured, 20mm Foam Board, 30kg/m3 Plastic insulation

4. **Noise Level:**
   - <70 Db

5. **Cleaning:**
   - Lint and fiber filter panel

6. **Doors:**
   - Front: 1 full window
   - Top: Removable latch

7. **Egg Trays:**
   - VS‐1 to VS‐6, 1 to 6 trays
   - 100 eggs/tray, K100, 45cm x 45cm

8. **Egg Turning:**
   - Motor: VS‐1/ VS‐3 = 8 W, VS‐4/ VS‐6 = 28 W
   - Dual 3D Roll Fans

9. **Ventilation/Control:**
   - Auto heat/humidity venting
   - Auto water pump, UV Bacteria Killing
   - Auto LED, Silent mode

10. **Temperature Control:**
    - Celsius, Swiss sensor, PID & Fuzzy Control
    - Settings: 0.1°C, Range: ±0.1°C
    - Air heating

11. **Temp Alerts/Safety:**
    - Low/High Temp Alerts, Excess Heat Dissipation
    - Calibration, Setting Limits

12. **Humidity Control:**
    - %RH, Swiss sensor
    - Settings: 1%RH, Range: ±1%RH
    - Auto Pump, Water Level Sensor
    - Overflow Detection

13. **Egg Turning Features:**
    - Setting Hours/Seconds, Route
    - Countdown Timer, Audible Notification
    - Tilt Angle: ~45°, Hand crank
    - Test Run, Deactivation

14. **Convenience:**
    - Sensor‐LED Lighting
    - Integrated Wheels
    - Detachable Components: Control Box, Fan Heat Box, Water Trays, Egg Trays
    - Separation Method: Connector